They are making a number of good points about How to Turn off the Water for Plumbing Repairs as a whole in the article just below.
If you try to close the water off to your fixtures by utilizing an angle stop and that does not work you will certainly have to close of the water main to make your repair service. There are also several other factors you could need to close the water main like fixing icy pipes, fixing leaks, changing components or faucets.
Many individuals are not aware that they even have a water pipe valve right in their very own residence as well as simply call a plumber of never wind up doing the fixing until things obtain actually bad since they just do not know that closing the water main is truly very easy.
One of the most common places a water pipe will certainly be situated in home is in your boiler room, cellar, or a removed panel in a section for your home.
When you discover the water pipe you will simply turn the valve clockwise to close all the water off in your house till you have finished the repair work. Some houses will certainly enjoy valve with a lever that you can pull rather than count on close the water off.
How to Find and Shut Off Main Water Shutoff Valve
Where is the main water shutoff valve located?
This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.
How to Turn Off Main Water Valve
Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.
If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.
Where are the isolation valves?
Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.
Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.
Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.
Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.
https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/
I was brought to that article about How to Locate & Turn Off Main Water Shut-Off Valves through a good friend on our other web page. If you please take the opportunity to distribute this article if you enjoyed it. We treasure reading our article about How to Turn Off the Water in an Emergency.
Quote